For various reasons, the UE might take longer to connect to the eNB. A
simple sleep might not be enough; instead, use Attach() to actively wait
that the UE gets an IP address. The added bonus of this function is that
it will also stop&restart a UE if it did not attach, i.e., it will try
multiple times to attach the UE.

The code (author) confused MCE_PARAMS_DESC and MCE_NETPARAMS_DESC and
tried to read the MCE name from MCE_NETPARAMS_DESC when in reality it
should come from MCE_PARAMS_DESC. This commit fixes to use the right
array.

Same reasoning as in previous commit.

Same reasoning as in the previous commit.

Some reasoning as in previous commit.

Same reasoning as in the previous commit.

Remove filling of broadcast_plmn, which does not exist in the
configuration.

In a previous commit, the functionality of handling IPv6 (and DNS names)
as part of the IPv4 was introduced (in IPv4 field for backwards
compatibility). This commit now removes superfluous configuration
fields:
- IPv6:  handled by IPv4 field
- active: users can just remove an entry
- preference: not needed

Rewrite sctp_create_new_listener() to use getaddrinfo() to look up
IPv4/IPv6 addresses via a common interface. This allows to use e.g. DNS,
and enables the SCTP library to listen on IPv6 ports.

To support the above, the corresponding message is changed to not take
an IPv4 address on 4 bytes (and separate IPv6), but a single name that
will be resolved via getaddrinfo()

The previous init message used to allow multiple IPv4/IPv6 addresses;
since this is not used anywhere, remove the corresponding functionality.

Modify all uses of this ITTI message to copy te SCTP init bind addr into
ITTI message.

Use getaddrinfo() to look up IP (v4/v6) addresses. The old
interface of separately specifying IPv4 and IPv6 addresses is
preserved, but both fields allow to specify types of addresses, and we
will remove one field in the future.

After the last commit, it is not possible to bind on separate interfaces
for F1-C and F1-U. In other words, it is for instance not possible to
have the F1-C on one subnet on one physical interface, and F1-U on
another subnet on another physical interface. This commit introduces a
second option MACRLCs.[0].local_n_address_f1u to allow to bind F1-U on
an alternative address; if it is not specified, the interface of F1-C is
reused.

The above only works for the DU; no corresponding option exists for the
CU. For the CU, use separate CU-CP and CU-UP.

Use it in the CI.

This reverts commit 28411652.

The problem is that (1) we don't really support multi-homing, but (2) on
some system, if the other IP addresses that the operating system
considers part of the multi-homed connection are HEARTBEAT'ed (e.g.,
docker), they answer with SCTP ABORT, which breaks the entire
connection.

In other words, force single-homing by binding. For F1-U uses, another
option will be introduced that allows to bind to a separate interface
for F1-U (separate from F1-C), if necessary.

Closes #727

Integration `2024.w14`

Closes #775 and #773

See merge request oai/openairinterface5g!2663

* !2411 Simple and generic trx_write support of out of time order requests
* !2532 moving decision on DCI format type to UE MAC
* !2565 improvements in security of nrUE
* !2656 remove stored G in UE DL, not needed and creating issues with DCI format 11/type0
* !2658 Fix sleeping ue at synchro
* !2649 NR SRS RRC assrtion removal
* !2662 Avoid concurrent write while filling RX/CRC.indication
* Remove obsolete "version" parameter from yaml files used on avra
* !2664 Remove duplicated NAS message send, already done above
* !2605 Improve performance polar encoder i.e., 3GPP 38.212 5.3.1.2 function
* !2629 Msg2 and Msg3 at gNB: check allocation before committing to Msg2
* !2657 replace transient malloc by stack allocation, add defense code on block size
* !2631 chore(ci): some docker improvements
* !2654 Pucch2 polar rx dynamic range fix
* !2666 [E2 Agent] Fix E2 Setup Request for ASan
* !2661 CI: iperf/iperf3 UDP analysis function fix → review in progress, review to be completed

Simplification of the code by replacing iperf_opt by target_bitrate (returned from Iperf_ComputeModifiedBW) - no need to repeat the steps to retrieve information about requested bitrate from iperf_opt. Compute iperf bitrate performance as receiver bitrate over requested (target) bitrate.
Fix an issue with misdetection of missing report line - "result" was defined 2x in the function. With this MR, result can be only None or stores output of re.search() for matching the report line pattern, which ensure proper detection of the report line as well as presence off all required components in the report line.

Sender bitrate is not always equal to the requested bitrate (set by "-b" iperf option) in iperf3 (v3.9) UDP tests, so we have to compture bitrate performance of UDP iperf3 test as receiver over requested bitrate. Bitrate performance then express percentage of requested bitrate, which is received on the receiver side.

For iperf3 (version 3.9) UDP, sender bitrate is not always equal to requested bitrate (defined by '-b' option). We need to retrieve information about the requsted bitrate from iperf command line options specified for each UDP testcase. This parameter is then used in UDP analysis functions for proper evaluation of the test results.

Prior to this commit, it might happen that the gNB used TDA 0 (Start 0
len 13) for mixed slot, in which case the UE could not send msg3
(because a mixed slot has less than 13 symbols).

fixes the overflow issue in the PUCCH2 RX with 4+ RX antennas and 12+
bits (polar code format). The fix scales the polar decoding LLR
computation according to the number of RX antennas. The issue was clear
for 100 MHz 4 RX antennas. Even

  nr_pucchsim -s -5 -q 8 -P 2 -b 12 -R 273 -z4 -n1000

doesn't converge to 0 BLER with increasing SNR. The issue didn't appear
in CI because of the bandwidth and antenna count limitations.

- docker on CI machine avra was updated to version 26.0.0, which reports
  parameter "version" as obsolete
- this additional log causes fail of the container undeployment to stage